Danfoss TripleLynx CN Manual de Instalação descarregar pdf (Página 188)

Configuration at a PC

Setting automatic/manual data backups (Internal/Backup)

188 of 268 Solar-Log

1000/500/200

Installation

“Data correction” section

Here you can adjust the values for previous days or change daily totals.

1 Enter the Date (on 8 digits): 2 digits for day, 2 digits for month and

2 digits for the year, separating each by a decimal point

2 Enter the Daily value in kWh

The daily value must correspond to the current meter reading, i.e. the real

daily value.

“Data import” section

An initial value can also be input to daily data already saved manually in So-

lar-Log™. This is useful any time that a large amount of data has to be saved

at a later time, and this would take too long with the “Data correction” function.

Data import deletes the existing data memory completely before the daily data

are imported. Therefore, the data import should be carried out as far as possi-

ble immediately after the startup of Solar-Log™.

A data import can only be made if all inverters have been correctly detected

and configured.

1 Before data import, Solar-Log™ asks for a user name and password. Enter

the following details:

User name: solarlog

Password: solarlog

2 Click on Browse...

 A box opens in which you can select the import file.

3 Click on Load

 The data are loaded.

The import file must consist of individual rows of text, where the date and daily

yield value in “Wh” (not kWh!) are separated by semicolons (CSV format).

Example:

01.04.06;136435

02.04.06;128219

etc.

Note: Here, the year value should also consist of 4 digits.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 267 268

Sem comentários

Danfoss TripleLynx CN Manual de Instalação Página 188