Danfoss VLT HVAC Basic Drive FC 101 Informações Técnicas descarregar pdf (Página 21)

3 Parameters

3.1 Main Menu - Operation and Display -

Group 0

Parameters related to the fundamental functions of the

frequency converter, function of the LCP buttons and config-

uration of the LCP display.

3.1.1 0-0* Basic Settings

0-01 Language

Option: Function:

Defines the language to be used in the display.

[0] * English

[1] Deutsch

[2] Francais

[3] Dansk

[4] Spanish

[5] Italiano

[28] Bras.port

[255] No Text

0-03 Regional Settings

Option: Function:

This parameter cannot be adjusted while the

motor is running. In order to meet the needs for

different default settings in different parts of the

world, 0-03 Regional Settings is implemented in

the frequency converter. The selected setting

influences the default setting of the motor

nominal frequency.

[0] * Interna-

tional

Sets default value of 1-23 Motor Frequency

[50Hz].

[1] North

America

Sets the default value of 1-23 Motor Frequency to

60Hz.

0-04 Operating State at Power-up

Option: Function:

Select the operating mode upon reconnection of

the frequency converter to mains voltage after

power down when operating in Hand (local)

mode.

[0] * Resume Resumes operation of the frequency converter

maintaining the same local reference and the

same start/stop condition (applied by [Hand On]/

[Off] on the LCP or Hand Start via a digital input

as before the frequency converter was powered

down.

0-04 Operating State at Power-up

Option: Function:

[1] Forced

stop,

ref=old

Uses saved reference [1] to stop the frequency

converter but at the same time retain the local

speed reference in memory prior to power down.

After mains voltage is reconnected and after

receiving a start command (using the LCP [Hand

On] button or Hand Start command via a digital

input) the frequency converter restarts and

operates at the retained speed reference.

0-06 GridType

Option: Function:

Select the grid type of the supply

voltage/frequency.

NOTE

Not all choices are supported in

all power sizes.

IT grid is a supply mains, where there

are no connections to ground.

Delta is a supply mains where the

secondary part of the transformer is

delta connected and one phase is

connected to ground.

[0] 200-240V/50Hz/IT-

grid

[1] 200-240V/50Hz/Delta

[2] 200-240V/50Hz

[10] 380-440V/50Hz/IT-

grid

[11] 380-440V/50Hz/Delta

[12] 380-440V/50Hz

[20] 440-480V/50Hz/IT-

grid

[21] 440-480V/50Hz/Delta

[22] 440-480V/50Hz

[30] 525-600V/50Hz/IT-

grid

[31] 525-600V/50Hz/Delta

[32] 525-600V/50Hz

[100] 200-240V/60Hz/IT-

grid

[101] 200-240V/60Hz/Delta

[102] 200-240V/60Hz

[110] 380-440V/60Hz/IT-

grid

[111] 380-440V/60Hz/Delta

[112] 380-440V/60Hz

Parameters VLT HVAC Basic Drive Programming Guide

20 MG.18.B1.02 - VLT

is a registered Danfoss trademark

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 98 99

Comentários a estes Manuais

Sem comentários

Danfoss VLT HVAC Basic Drive FC 101 Informações Técnicas Página 21

Comentários a estes Manuais