Danfoss VLT HVAC Basic Drive FC 101 Especificações descarregar pdf (Página 9)

1.3.5 Connecting to Mains and Motor

The frequency converter is designed to operate all

standard three-phased asynchronous motors. For

maximum cross-section on wires please see section

1.7 General Specifications.

•

Use a shielded/armored motor cable to comply

with EMC emission specifications, and connect

this cable to both the decoupling plate and the

motor metal.

•

Keep motor cable as short as possible to reduce

the noise level and leakage currents.

•

For further details on mounting of the

decoupling plate, please see instruction

MI02QXYY

•

Also see EMC-Correct Installation in the Design

Guide, MG18CXYY.

1. Mount the earth wires to earth terminal.

2. Connect motor to terminals U, V and W.

3. Mount mains supply to terminals L1, L2 and L3

and tighten.

H1-H5 Frame

IP20 200-240 V 0.25-11 kW and IP20 380-480 V 0.37-22 kW.

130BB634.10

Motor

-DC

+DC

MAINS

1 Line

2 Earth

3 Motor

4 Relays

Quick Guide VLT HVAC Basic Drive Quick Guide

8 MG18A302 - VLT

is a registered Danfoss trademark

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Sem comentários

Danfoss VLT HVAC Basic Drive FC 101 Especificações Página 9