Danfoss VLT 6000 HVAC Manual de Serviço descarregar pdf (Página 69)

VLT

6000 HVAC

69MG.60.B1.02 - VLT is a registered Danfoss trade mark

Programming

■■

■ Control unit LCP

The front of the VLT frequency converter features a

control panel - LCP (Local Control Panel). This is a

complete interface for operation and programming of

the VLT 6000 HVAC.

The control panel is detachable and can - as an

alternative - be installed up to 3 metres away from the

VLT frequency converter, e.g. on the front panel, by

means of a mounting kit option.

The functions of the control panel can be divided into

five groups:

1. Display

2. Keys for changing display mode

3. Keys for changing program parameters

4. Indicator lamps

5. Keys for local operation.

All data are indicated by means of a 4-line alpha-

numeric display, which, in normal operation, is able to

show 4 operating data values and 3 operating

condition values continuously. During programming,

all the information required for quick, effective

parameter Setup of the VLT frequency converter will

be displayed. As a supplement to the display, there

are three indicator lamps for voltage (ON), warning

(WARNING) and alarm (ALARM), respectively.

All VLT frequency converter parameter Setups can be

changed immediately via the control panel, unless this

function has been programmed to be Locked [1] via

parameter 016 Lock for data change or via a digital

input, parameters 300-307 Lock for data change.

■■

■ Control keys for parameter Setup

The control keys are divided into functions. This

means that the keys between display and indicator

lamps are used for parameter Setup, including

selecting the display indication during normal

operation.

[DISPLAY / STATUS] is used for selecting

the indication mode of the display or when

returning to the Display mode from either

the Quick menu or the Extend menu

mode.

[QUICK MENU] gives access to the

parameters used for the Quick menu. It is

possible to switch between the Quick

menu and the Extend menu modes.

[EXTEND MENU] gives access to all

parameters. It is possible to switch

between the Extend menu and the Quick

menu modes.

[CHANGE DATA] is used for changing a

setting selected either in the Extend menu

or the Quick menu mode.

[CANCEL] is used if a change of the selec-

ted parameter is not to be carried out.

[OK] is used for confirming a change of the

parameter selected.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 176 177

Comentários a estes Manuais

Sem comentários

Danfoss VLT 6000 HVAC Manual de Serviço Página 69

Comentários a estes Manuais

Manuais e produtos relacionados com Adaptadores e conversores de corrente Danfoss VLT 6000 HVAC