Danfoss 102 Manual do Utilizador descarregar pdf (Página 12)

12 Manual RS8DY302 © Danfoss 07-2005 EKC 102

RC-EM

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alternations can be made without subsequential changes being necessary in speciﬁcations already agreed.

Data

Supply voltage 230 V a.c. +15/-15 %. 1,5 VA

Sensors

Pt 1000 or

PTC (1000 ohm / 25°C) or

NTC-M2020 (5000 ohm / 25°C)

Accuracy

Measuring range -60 to +99°C

Controller

±1 K below -35°C

±0,5 K between -35 to +25°C

±1 K above +25°C

Pt 1000 sensor

±0.3 K at 0°C

±0.005 K per grad

Display LED, 3 digits

Digital inputs

Signal from contact functions

Requirements to contacts: Gold plating

Cable length must be max. 15 m

Use auxiliary relays when the cable is longer

Electrical con

nection cable

Max.1,5 mm

multi-core cable on supply and relays.

Max. 1 mm

on sensors - and DI inputs.

Terminals are mounted on the circuit board

Relays

Refrigeration

SPDT, Imax. = 10 A ohmic/

6 A AC 15* inductive

(It is a 16 A relay, but conductor

lanes and derating mean that 10 A

must not be exceeded).

Alarm/

Defrost/

Refrigeration 2

Environments

0 to +55°C, During operations

-40 to +70°C, During transport

20 - 80% Rh, not condensed

No shock inﬂuence / vibrations

Density

IP 65 from front.

Buttons and packing are imbedded in the front.

Approvals

EU Low Voltage Directive and EMC demands re CE-

marking complied with

LVD tested acc. EN 60730-1 og EN 60730-2-9, A1, A2

EMC tested acc. EN50082-1 og EN 60730-2-9, A2

* AC 15 load to EN 60947-5-1

Weight = 170 g

1 2 ... 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Danfoss 102 Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Danfoss 102