Danfoss VLT 8000 AQUA Guia de Instalação descarregar pdf (Página 38)

VLT® 8000 AQUA

■ Changing data

Regardless of whether a parameter has been

selected under the Quick menu or the Extended

menu, the procedure for changing data is the same.

Pressing the [CHANGE DATA] key allows change

of the selected parameter, and the underlining

in line 4 will flash on the display.

The procedure for changing data depends on whether

the selected parameter represents a numerical

data value or a functional value.

If the chosen parameter represents a numeric data

value, the first digit can be changed by means of

the [+/-] keys. If the second digit is to be changed,

first move the cursor by using the [<>] keys, then

change the data value using the [+/-] keys.

175ZA698.10

24.2 Hz

SETUP

FREQUENCY

205 MAX. REFERENCE

000060,000 Hz

The selected digit is indicated by a flashing cursor. The

bottom display line gives the data value that will be

entered (saved) when signing off by pressing the [OK]

button. Use [CANCEL] to cancel the change.

If the selected parameter is a functional value,

the selected text value can be changed by

means of the [+/-] keys.

175ZA689.10

3.90 A

SETUP

210 REFERENCE TYPE

SUM

MOTOR CURRENT

The functional value flashes until signing off by pressing

the [OK] button. The functional value has now been

selected. Use [CANCEL] to cancel the change.

MG.80.A6.22 - VLT is a registered Danfoss trademark

1 2 ... 33 34 35 36 37 38 39 40 41

Sem comentários

Danfoss VLT 8000 AQUA Guia de Instalação Página 38