Danfoss TP5000 si range Manual do Utilizador descarregar pdf (Página 3)

Datasheet

TP5000 Si Programmable Room Thermostat

Part No. 082v07 04/09

The service interval timer allows the installer to

select a service due date for the boiler, this can

be set at between 28 days and 366 days from the

current date.

Service due date is within 28 days

From 28 days prior to the service due date, a visual

warning will appear in the display and a buzzer will

sound for ten seconds each hour commencing at

midday, this can be cancelled for the current day

by pressing any button.

Service Interval Timer Service due date is reached or passed

When the service due date is reached the visual

and audible warning are repeated each hour of

the day commencing at midday, but the duration

of the alarm is increased to 60 seconds, this can

be cancelled for the current day by pressing any

button. All override and programming buttons

are disabled and depending upon service interval

timer setting, heating can be restricted to 15, 30 or

45 minutes in each programmed hour.

Option Service Interval Timer Function

Setting 0 Disabled, (factory default)

Setting 1 Active, visual and audible warning, no heat reduction

Setting 2 Active, visual and audible warning, heat reduced to 45 minutes per hour

Setting 3 Active, visual and audible warning, heat reduced to 30 minutes per hour

Setting 4 Active, visual and audible warning, heat reduced to 15 minutes per hour

Speciﬁ cation and Ordering

Thermostat Features

Battery Models 230V Models

Hard-wired Wireless Hard-wired

Hard-wired, built-in sensor

Type

Sales Code

TP5000 Si

087N791000

TP5000M Si

087N791700

Hard-wired, remote sensor inputs

(1) (2)

Type

Sales Code

TP5000A Si

087N791100

TP5000MA Si

087N79800

Wireless, built-in sensor

Type

Sales Code

TP5000RF Si

087N791200

Wireless, built-in sensor

complete with RX1 receiver

(3)

Type

Sales Code

TP5000RF Si + RX1

087N791400

Wireless, remote sensor

Type

Sales Code

TP5000ARF Si

087N791300

5/2 day or 24 hour programmable room thermostat Yes, selectable by installer

2, 4 or 6 events per day with optional A/B programming Yes, selectable by installer

Factory pre-set programmes Yes, one for weekdays, another for weekends

Factory set calendar clock Automatic summer/wintertime change

Time accuracy ± 1 minute per year

Memory back-up, time and all user and installer settings Retained for life of product

Temperature range 5-30°C

Programmable frost thermostat function Yes

Control output, derived from PI algorithm On/Oﬀ or Chrono-proportional, 3, 6, 9 or 12 cycles per hour

Switching diﬀ erential in On/Oﬀ mode ±1°C

Installer selectable advanced programming options Yes, refer to installation instructions for list

Installer selectable service interval timer Yes, 28 to 366 days from current date

Programmable range limitation Yes, max and min

Electronic keyboard lock Yes, full or part

Power supply 2 x AA alkaline cells 230V, 50Hz

Switching action of output relay SPDT (voltage free)

Switch rating of output relay 3 (1) A, 10-230V N/A 3(1)A, 10-230V

Transmission frequency (RF models) N/A 433.92MHz N/A

Transmission range (RF models) N/A 30m max. N/A

Dimensions, mm 110 wide x 88 high x 28 deep

Design standard EN60730-2-9, (EN300220 for RF)

(1)

Can be conﬁ gured by installer for remote temperature sensor, limit sensor, window contact or telephone activated switch contact.

(2)

Remote sensor is supplied as an accessory, if remote room sensor is required order TS2 sensor, code 087N681100

(3)

RX receiver requires 230 volt power supply

1 2 3 4

Comentários a estes Manuais

Sem comentários

Danfoss TP5000 si range Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Danfoss TP5000 si range