Danfoss REP24 Manual do Utilizador descarregar pdf (Página 10)

Setting the temperature

Turn setting dial to required temperature.

Frost Protection

To activate frost protection, turn the dial below 10°C. Frost

protection becomes active at 8°C. If the temperature in the

room drops below 8°C then the output will activate.

When frost protection is activated the right LED will turn

orange.

Standby Mode

In cooling mode, the standard frost protection is not available;

instead there is standby mode. When the dial is turned past

10°C the unit enters standby mode and cooling will be inactive

until dial is turned up past 10°C.

Display / Setting the temperature

User Instructions

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Danfoss REP24 Manual do Utilizador Página 10