Danfoss TripleLynx CN Manual do Utilizador descarregar pdf (Página 6)

2.1.1. View

Menu Structure - View

Parameter Description

Mode: On grid Displays present inverter mode. See operation mode definitions

Prod. today: 12345 kWh Energy production today in kWh. Value from inverter or S0 energy-meter

Output Power: 12345 W Current output power in Watt

[ --- utilization bar --- ] Shows level of inverter utilisation as % of max. utilisation

Table 2.1: View

2.1.2. View 2

Pressing F1 once more will result in the following screen being shown (see section on buttons

for more information):

Menu Structure - View 2

Parameter Description

Grid mgmt:

Indicates whether or not any grid management measures are in effect.

Hidden if no grid management measures are in effect.

Performance ratio: 87 % Performance ratio is shown if irradiation sensor is available (local or master).

Total CO

saved:123 T Lifetime CO

emission saved, calculated using configured value.

Total revenue: 234.5 yuan Lifetime revenue, calculated using configured value.

Table 2.2: View 2

2.1.3. Status

Menu Structure - Status

Display Functions Description

[-] Ambient Conditions Only applicable if sensors are connected

Irradiance: 1400W/m

Irradiance. “NC” if not connected

PV module temp: 100

PV module temperature. “NC” if not connected

Ambient temp: 20

Ambient temperature. “NC” if not connected

Irr. sensor temp: 20

Irradiation sensor temperature. “NC” if not connected

[-] Photovoltaic

[-] Present values

[-] PV input 1

Voltage: 1000V Voltage detected at PV input 1

Current: 15.0 A Current detected at PV input 1

Power 10000 W Power detected at PV input 1

[+] PV input 2

[+] PV input 3 Not visible if inverter type is 10 kW

[-] Isolation Resistance

Resistance: 45 MΩ PV isolation at start up

[-] PV Input Energy

Total: 369000kWh Daily production of all PV inputs

PV1: 123000 kWh Daily production of PV input 1

PV2: 123000 kWh Daily production of PV input 2

PV3: 123000 kWh Daily production of PV input 3

[-] PV Configuration

PV input 1: Individual

Configuration of PV input 1. The configuration is only shown when the in-

verter is in Connecting or On grid mode.

PV input 2: Individual

PV input 3: Individual

[-] AC-grid

[-] Present Values

[-] Phase 1

Voltage: 250 V Voltage on phase 1

Current: 11.5 A Current on phase 1

Frequency: 50 Hz Frequency on phase 1

Power: 4997 W Power on phase 1

[+] Phase 2

[+] Phase 3

[-] Residual Current Monitor

Current: 350 mA Residual current in mA

[-] Grid management Only visible if enabled by the grid code setting.

[-] Power level adjustment

[-] Present limit: 100 %

Maximum allowed power output in % of nominal power output. “Off”

means that the power level functionality has been disabled in the inverter.

Table 2.3: Status

2. Display

L00410581-01_02 5

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comentários a estes Manuais

Sem comentários

Danfoss TripleLynx CN Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Adaptadores e conversores de corrente Danfoss TripleLynx CN