Danfoss VLT 8000 AQUA Instruções de Operação descarregar pdf (Página 100)

VLT

8000 AQUA

Function:

Setting of the desired operating mode when the

mains voltage is reconnected.

Description of choice:

Auto restart [0] is selected if the frequency converter is to

start up in the same start/stop condition as immediately

before power to the frequency converter is cut off.

OFF/Stop [1] is selected if the frequency converter

is to remain stopped when the mains voltage is

connected, until a start command is active. To

restart, activate the key [HAND START] or [AUTO

START] b

y using the control panel.

NB!:

If [HAND START] or [AUTO START] cannot

be activated by the keys on the control

panel (see parameter 012/014 Hand/Auto

start on LCP) the motor will not be able to

restart if OFF/Stop [1] is selected. If Handstart

or Autostart has been programmed for activation

via the digital inputs, the motor will not be able

to restart if OFF/Stop [1] is selected.

✭ = factory setting. () = display text [] = value for use in communication via serial communication port

MG.83.A2.02 - VLT is a registered Danfoss trademark

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 209 210

Sem comentários

Danfoss VLT 8000 AQUA Instruções de Operação Página 100