Danfoss DHP-C Opti Guia do Utilizador descarregar pdf (Página 21)

1. Switch off the heat pump.

For the brine circuit filter - remove the insulation around the filler cock.

3. Turn the shut-off tap (A) to the closed position.

4. Unscrew the cover (B) and remove it.

5. Remove the filter.

6. Rinse the filter (C).

7. Reinstall the filter.

8. Check that the O-ring (D) on the cover is not damaged.

9. Screw the cover back into place.

10. Turn the shut-off tap to the open position.

11. For the brine circuit filter - reinstall the insulation around the filler cock.

12. Start the heat pump.

User Guide Domestic heat pumps

Danfoss Heating Solutions VUGFE202

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Danfoss DHP-C Opti Guia do Utilizador Página 21